期刊文献+

电梯门机械强度无线检测系统设计 预览

Design of A Wireless Measurement System for Elevator Door Mechanical Strength
在线阅读 下载PDF
收藏 分享 导出
摘要 本文阐述一种电梯门机械强度检测装置的硬件和软件设计。该系统采用压力传感器检测施力装置施加在电梯门上的力,用位移传感器检测加力过程中电梯门自身的形变;传感器输出信号送至A/D转换模块,转换结果由CC2530处理后通过ZigBee无线协议发送至上位机(工业平板电脑)进行检测数据存储和处理,并自动生成检测报告。检验人员通过操作工业平板电脑即可实现对电梯门的智能检测和数据处理,免去手工记录数据和处理等传统的工作方式,可提高电梯门的检验检测工作效率。 The hardware and software design of an elevator door mechanical strength testing device was introduced in this paper. A pressure sensor was used to measure the force applied on the elevator door,and a displacement sensor was used to detect the deformation of the elevator door itself in the process of applying force.The sensor output signal was sent to the A/D converter. The conversion result was processed by CC2530 and sent to a host computer( industrial tablet computer) through ZigBee Wireless protocol for storage and processing. The test report was automatically generated by the host computer. The inspectors can realize the intelligent detection and data processing of the elevator door by operating the industrial tablet computer,which eliminates the traditional working methods such as manual recording data and processing,and improves the inspection and inspection efficiency of the elevator door.
作者 付勇 刘志鹏 罗力 杨朝磊 朱希辰 周扬 王民慧 FU Yong1, LIU Zhipeng1 , LUO Li1, YANG Chaolei2 , ZHU Xichen1, ZHOU Yang1 , WANG Minhui2(1.Guizhou Special Equipment Inspection and Testing Institute , Guiyang 550014, China; 2. College of Electrical Engineering, Guizhou University, Guiyang 550025, China)
出处 《贵州大学学报:自然科学版》 2017年第3期58-61,共4页 Journal of Guizhou University(Natural Science)
基金 国家质量监督检验检疫总局科技计划项目资助(2015QK196)
关键词 电梯门 机械强度 智能检测 elevator door mechanical strength smart measurement
作者简介 付勇(1971-),男,工程师,研究方向:特种设备安全,Email:2540665170@qq.com. 通讯作者:杨朝磊,Email:290753726@qq.com.
  • 相关文献

参考文献3

二级参考文献16

共引文献88

投稿分析

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部 意见反馈