期刊文献+

压力容器焊缝超声TOFD检测的COMSOL模拟 预览 被引量:1

COMSOL Simulation of Ultrasonic TOFD Detection of Pressure Vessel Welds
在线阅读 下载PDF
收藏 分享 导出
摘要 运用多物理场耦合有限元软件COMSOL对压力容器焊缝的超声响应特性进行有限元分析,并分析了不同探头参数,如中心距、频率、角度等对检测结果的影响。仿真模拟结果表明,声波传播过程的仿真模拟有利于更好地理解缺陷特征,提高缺陷的评定和识别。探头参数的仿真模拟有利于检测工艺的制定,适当缩小探头中心距有助于分离混叠的直通波和缺陷波信号;适当减小探头角度能有效提高信号分辨率;检测时需要合理选择探头频率,薄板检测时选择较大频率的探头,厚板检测时选择较小频率的探头。 The multi-physics coupling finite element software COMSOL was used to perform finite element analysis on the ultrasonic response characteristics of pressure vessel welds,and the effects of different probe parameters such as center distance,frequency,and angle on the test results were analyzed.The simulation results show that the simulation of sound propagation process is conducive to better understanding the defect characteristics and improving the assessment and identification of defects.The simulation of the probe parameters is conducive to the development of the inspection process.Properly reducing the center distance of the probe helps to separate the aliased through-wave and defect wave signals;appropriately reducing the probe angle can effectively improve the signal resolution;reasonably selecting the probe frequency is recommended and the basic principle is that a little higher frequency should be selected for thin-plate inspection and lower frequency should be selected for thicker boards.
作者 伏喜斌 FU Xibin1,2 (1.Xiamen Special Equipment Inspection Institute, Xiamen 361004, China ; 2.School of Mechanical Engineering and Automation, Fuzhou University, Fuzhou 350108, China)
出处 《无损检测》 2018年第7期9-14,共6页 Nondestructive Testing
关键词 超声TOFD 多物理场耦合 COMSOL 声波传播 探头参数 ultrasonic TOFD multi-physics coupling COMSOL sound wave propagation probe parameter
作者简介 伏喜斌(1977-),男,博士,高级工程师,主要从事特种设备无损检测、节能技术方面的工作通信作者:伏喜斌,xibinfu@163.com
  • 相关文献

参考文献7

二级参考文献25

共引文献99

同被引文献2

引证文献1

投稿分析

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部 意见反馈