期刊文献+

含离散源损伤复合材料加筋板剩余强度及其修理技术研究 预览

Study on Residual Strength of Composite Stiffened Panel with Discrete Source Damage and Repair Technique
在线阅读 下载PDF
收藏 分享 导出
摘要 飞机复合材料结构在使用过程中难免遭受离散源损伤,这种损伤会严重降低结构的承载能力。针对含穿透性切口的复合材料加筋板,采用试验和数值分析方法研究其拉伸载荷作用下的剩余强度,并根据设计应变设计了金属补片机械连接修理方案,提出了一种评估复合材料机械连接修理结构剩余强度的数值分析方法。分析方法以有限元模拟为主,用壳元模拟层压板,用梁元模拟紧固件,用多点约束模拟紧固件与孔的接触,用0°层点应力准则预估复合材料破坏载荷。通过试验验证了评估方法,得到了修理结构强度恢复率。本文的研究对于飞机复合材料结构修理技术研究有一定的借鉴意义。 Aircraft composite structure will inevitably suffer discrete source damage in its service life. This kind of damage will decrease load bearing capacity of structure severely. In this paper,tensile residual strength of composite stiffened panel with penetrated cut-out is studied by numerical simulation and experimental investigation. Based on finite element analysis and ultimate strain limits,a metal patch bolted repair pattern is designed. An evaluating method is proposed for metal bolted repair composite panel in which skin and stiffener are modeled by using shell element whereas the fasteners are modeled by beam elements. MPC technique is adopted to simulate the constraint between fastener and hole. The point criterion is incorporated to obtain the failure load. The analysis method is validated by test results. The strength recovery ratio of damaged panel and repaired panel are gotten. The research of this paper will provide support information for composite structure repair technique.
作者 张阿盈 陈向明 王力立 Zhang Aying, Chen Xiangming, Wang Lili (Aircraft Strength Research Institute of China, A VIC, Xi'an 710065, Shaanxi, China)
出处 《工程与试验》 2018年第2期16-19,共4页 Test Technology and Testing Machine
基金 航空科学基金资助项目(2016ZA23011)
关键词 复合材料加筋板 离散源损伤 剩余强度 机械连接修理 有限元模拟 composite stiffened panel discrete somee damage residual strength bolted repair finite element simulation
作者简介 张阿盈(1963-),女,硕士,高级工程师,研究方向:复合材料结构强度技术。
  • 相关文献

参考文献2

二级参考文献10

共引文献4

投稿分析

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部 意见反馈